| Step | | Procedure & Parts & Tools |
| 1 |
|
PULL TO REMOVE THE RED CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 2 |
|
PULL TO REMOVE THE BLUE CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 3 |
|
REMOVE THE 2 TANK BOLTS ON EACH SIDE OF THE MACHINE. THESE BOLTS ARE LOCATED AT THE FRONT OF THE MACHINE AT THE BASE.
| Wrench-Allen metric 6.0mm |
|
|
| 4 |
|
REMOVE THE BATTERIES FROM THE MACHINE
|
| 5 |
|
LAY THE MACHINE ON ITS SIDE
|
| 6 |
|
LOCATE THE HOSE BETWEEN THE VALVE AND THE FILTER
|
| 7 |
|
LOOSEN THE HOSE CLAMP SCREW TO LOOSEN THE HOSE CLAMP
| Screwdriver-flat tip |
|
|
| 8 |
|
SLIDE THE HOSE CLAMP DOWN ON HOSE (SAVE THE HOSE CLAMP) AND PULL TO REMOVE THE HOSE
|
| 9 |
|
REMOVE THE 2 SCREWS HOLDING THE FILTER TO THE MACHINE
| Screwdriver-phillips |
|
|
| 10 |
|
PULL THE FILTER ASSEMBLY AWAY FROM THE MACHINE
|
| 11 |
|
LOOSEN THE HOSE CLAMP SCREW TO LOOSEN THE HOSE CLAMP
| Screwdriver-flat tip |
|
|
| 12 |
|
PULL TO REMOVE THE HOSE FROM THE FILTER ASSEMBLY (SAVE THE HOSE CLAMP)
|
| 13 |
|
THREAD HOSE THRU MACHINE WALL TO REMOVE
|
| 14 |
|
REVERSE STEPS 3 THRU 13 TO INSTALL A NEW HOSE (SOLD BY THE INCH)
|